(1/3) 005-02 / 20080915 / e511_mlf1608j.fm ? all specifications are subject to change without notice. smd inductors(coils) for signal line(multilayer, magnetic shielded) mlf series mlf1608-j since digital devises have become faster and have more functions, stricter inductance tolerance has become necessary in the high frequency range. the ferrite material and internal electrodes for mlf1608-j toler- ance products have been newly developed and have received opti- mal process design. as a result, tolerance could be narrowed (5%) to half of the previous mlf series, and drift variance was also been greatly improved. features inductance tolerance is 5% (j-tolerance) temperature stress (drift variance percentage) for soldering is 3%, which is an improvement of 1/3 over the previous product. the products contain no lead and also support lead-free soldering. it is a product conforming to rohs directive. applications signal processing such as cellular phone, car audio, tuner, dvc. specifications recommended soldering condition reflow soldering product identification (1) series name (2) dimensions l w (3) material code (4) inductance value (5) inductance tolerance (6) packaging style packaging style and quantities handling and precautions before soldering, be sure to preheat components. the preheat- ing temperature should be set so that the temperature difference between the solder temperature and product temperature does not exceed 150c. after mounting components onto the printed circuit board, do not apply stress through board bending or mishandling. the inductance value may change due to magnetic saturation if the current exceeds the rated maximum. do not expose the inductors to stray magnetic fields. avoid static electricity discharge during handling. when hand soldering, apply the soldering iron to the printed cir- cuit board only. temperature of the iron tip should not exceed 350c. soldering time should not exceed 3 seconds. conformity to rohs directive operating temperature range ?55 to +125c storage temperature range ?55 to +125c natural cooling 10s max. preheating 60 to 120s soldering 30 to 60s 230?c 250 to 260?c 180?c 150?c time(s) 1608 1.6 0.8 0.8mm r10 0.1 h 1r0 1.0 h 100 10 h j5% t taping [reel] packaging style quantity taping 4000 pieces/reel mlf 1608 d r10 j t (1) (2) (3) (4) (5) (6) please contact our sales office when your application are considered the following: the device?s failure or malfunction may directly endanger human life (e.g. application for automobile/aircraft/medical/nuclear power devices, etc.) conformity to rohs directive: this means that, in conformity with eu directive 2002/95/ec, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, pbb and pbde, have not been used, except for exempted applications.
(2/3) 005-02 / 20080915 / e511_mlf1608j.fm all specifications are subject to change without notice. shapes and dimensions/recommended pc board pattern electrical characteristics test equipment inductance, q: ag4294a-16034g typical electrical characteristics q vs. frequency characteristics impedance vs. frequency characteristics inductance (h) inductance tolerance q te s t frequency l, q (mhz) te s t current l, q (ma) self-resonant frequency (mhz) dc resistance ( ? ) rated current (ma)max. part no. min. typ. min. typ. max. typ. 0.1 5% 15 25 25 1.0 450 600 0.35 0.20 200 mlf1608dr10j 0.12 5% 15 25 25 1.0 400 550 0.40 0.20 200 mlf1608dr12j 0.15 5% 15 25 25 1.0 350 500 0.45 0.25 200 mlf1608dr15j 0.18 5% 15 25 25 1.0 320 450 0.50 0.25 150 mlf1608dr18j 0.22 5% 15 25 25 1.0 290 400 0.55 0.30 150 mlf1608dr22j 0.27 5% 15 25 25 1.0 260 350 0.60 0.35 150 mlf1608dr27j 0.33 5% 15 25 25 1.0 230 320 0.75 0.40 100 mlf1608dr33j 0.39 5% 15 25 25 1.0 210 290 0.85 0.45 100 mlf1608dr39j 0.47 5% 15 30 25 1.0 190 260 0.95 0.50 100 mlf1608dr47j 0.56 5% 15 30 25 1.0 170 230 1.05 0.55 100 mlf1608dr56j 0.68 5% 15 30 25 1.0 150 210 1.25 0.65 70 mlf1608dr68j 0.82 5% 15 30 25 1.0 130 190 1.40 0.75 70 mlf1608dr82j 1.0 5% 35 50 10 1.0 120 170 0.50 0.25 50 mlf1608a1r0j 1.2 5% 35 50 10 1.0 110 150 0.65 0.25 50 mlf1608a1r2j 1.5 5% 35 55 10 1.0 100 140 0.70 0.30 50 mlf1608a1r5j 1.8 5% 35 55 10 1.0 90 130 0.85 0.35 50 mlf1608a1r8j 2.2 5% 35 55 10 1.0 80 120 1.00 0.45 30 mlf1608a2r2j 2.7 5% 35 55 10 1.0 70 110 1.15 0.50 30 mlf1608a2r7j 3.3 5% 35 60 10 1.0 65 100 1.30 0.55 30 mlf1608a3r3j 3.9 5% 35 60 10 1.0 60 90 1.45 0.65 30 mlf1608a3r9j 4.7 5% 35 60 10 1.0 55 80 1.60 0.75 30 mlf1608a4r7j 5.6 5% 35 60 4 0.1 45 70 1.10 0.55 15 mlf1608e5r6j 6.8 5% 35 60 4 0.1 40 60 1.30 0.65 15 mlf1608e6r8j 8.2 5% 35 60 4 0.1 35 55 1.50 0.80 10 mlf1608e8r2j 10.0 5% 30 55 2 0.1 30 50 1.70 1.00 10 MLF1608E100J 12.0 5% 30 55 2 0.1 25 45 1.80 1.20 10 mlf1608e120j 0.80.15 0.80.15 0.30.2 0.30.2 1.60.15 dimensions in mm net weight : 4mg 0.8 0.6 0.6 0.8 1 0 70 60 50 40 30 20 10 10 100 1000 q frequency ( mhz ) 4.7 h 12 h 1 h 0.82 h 0.1 h 1 1 10000 1000 10 100 10 100 1000 impedance ( ? ) frequency ( mhz ) 4.7 h 12 h 1 h 0.82 h 0.1 h
(3/3) 005-02 / 20080915 / e511_mlf1608j.fm all specifications are subject to change without notice. packaging styles reel dimensions tape dimensions 1.0 ?178 2.0 2.0 0.5 ?13 0.5 ?21 0.8 ?60 2.0 13.0 1.4 9.0 0.3 dimensions in mm 160min. taping 200min. 300min. drawing direction dimensions in mm 8.0 0.3 3.5 0.05 1.9 0.2 1.75 0.1 1.1max. 1.1 0.2 4.0 0.1 4.0 0.1 2.0 0.05 1.5 +0.1 ?0.0 sprocket hole cavity
|
